







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterTub-to-Shower Conversion in Grand Prairie, TX
A tub-to-shower conversion in Grand Prairie typically runs $4,200 to $9,800 for a standard alcove swap, and most projects are finished in three to five days. The work replaces an existing tub with a walk-in shower on the same footprint, which means reworking the drain, substrate, and waterproofing rather than just dropping in a new pan. We do these conversions because Grand Prairie homeowners ask for them constantly: a 1990s garden tub they never use, a parent who can’t safely step over a 16-inch rim, or a tub surround that’s gone soft around the drain. Our technicians have up to 22 years of experience with the tile, waterproofing, and plumbing this job demands, and every conversion comes with a written price before we open a wall. Call (888) 255-7593 for a free estimate, or start with the bigger picture on our home page and our Bathroom Remodeling in Grand Prairie page for how a shower fits into a full bath scope.
Key Takeaways
- A tub-to-shower conversion keeps your existing drain location, which is why it costs thousands less than relocating plumbing.
- Expect $4,200-$9,800 in Grand Prairie depending on pan type, tile, and whether the valve gets replaced.
- Most conversions take three to five working days on site.
- Every completed conversion carries the 365-Day Done Right Promise: if the work fails inside a year, we return and correct it at no charge.
- Your price is written before any work starts, and it does not move at the door.

When You Need Tub-to-Shower Conversion
Not every tired tub needs to come out. But these are the signals we see most often on Grand Prairie jobs, and they usually point the same direction.
- The tub is a garden tub nobody uses. Plenty of homes built in Grand Prairie in the 1990s and early 2000s have a deep soaking tub in the hall bath. It eats the floor plan, and the family showers in the other bathroom. Removing it opens up real square footage.
- Soft or springy floor around the drain. When you step into a tub and the floor gives slightly near the drain, the substrate underneath has likely been wet for a while. That’s a sign the surround and pan need to come out regardless of what you put back.
- Mobility or safety concerns. A shower with a low curb, a bench, and grab-block backing makes a bathroom usable for years longer. This is the single most common reason we get asked to convert.
- The tub surround is failing. Cracked caulk lines, mold in the corners, or tile that sounds hollow when tapped means water has gotten behind the surface. A conversion replaces the whole wet area instead of patching a failing one.
- Water bills and fill time. A standard tub holds 40 to 60 gallons. Most showers use far less, and in a Grand Prairie summer, that difference shows up on the bill.
- You’re updating for resale. A clean walk-in shower in the hall bath reads as updated to buyers in a way a dated tub surround does not.
Our Tub-to-Shower Conversion Process
Here’s exactly how a conversion runs, in order, with what happens at each step. Every one of these is on the written scope before work begins.
- Free in-home estimate and written price. We measure the opening, check the drain location, and inspect the wall behind the valve. You get a written price and a written scope before any work starts – not a verbal number that shifts once the wall is open.
- Protect and demo. Floors get covered, the tub and surround come out, and we inspect the substrate – the framing and subfloor that the shower gets built on. If there’s rot or water damage, you hear about it with a price before we touch it. No surprise invoices.
- Rough-in and valve work. The drain gets reworked to fit the shower pan, and the mixing valve gets replaced or rebuilt so you know the temperature control is new. This is the stage where cutting corners costs you later, so we don’t.
- Substrate and waterproofing. We install a cement or foam board substrate and a full waterproofing membrane tied into the drain. This is the part of the job you’ll never see and the part that decides whether the shower lasts.
- Pan, tile, and fixtures. The shower pan goes in, walls get tiled or a solid-surface surround gets set, and fixtures go on. We install Kohler and Moen fixtures on these jobs, and the brand and model are on the written scope so there’s no guessing what you paid for.
- Close out and hand-off. We clean the site, walk the finished shower with you, and hand you the signed written guarantee. If anything in the conversion fails within a year, our 365-Day Done Right Promise means we come back and correct it at no charge.

Tub-to-Shower Conversion Pricing in Grand Prairie
Here’s what tub-to-shower work actually costs in the Grand Prairie market. These are real ranges, not “call for a quote.”
| Item | Typical range |
|---|---|
| Basic alcove conversion, acrylic pan and surround | $4,200 – $6,300 |
| Mid-range with tile walls and a bench | $6,000 – $8,200 |
| Full tile conversion with custom pan and niche | $7,500 – $9,800 |
| Drain relocation (adding to the base price) | $600 – $1,800 |
| Mixing valve replacement | $350 – $700 |
| Subfloor or framing repair, if discovered | $400 – $1,500 |
A few honest notes on what moves that number. Pan type is the biggest lever: an acrylic pan and surround is the lowest-cost path and goes in fast; a full tile shower with a custom pan is at the top of the range and takes longer. Drain location matters more than most homeowners expect – keeping the drain where it is keeps the price down, and moving it adds plumbing work. Wall condition behind the old tub is a wildcard until we open it; that’s why we price repairs separately and put them in writing before we do them, not after. Fixture selection matters too: choosing from documented brands like Kohler and Moen means specs and manufacturer warranties are traceable and we’re not guessing about what fits.
For a full bath rework beyond the shower – vanity, flooring, lighting – see our Bathroom Remodeling service. We’ll give you a written price either way, and if you’re comparing options, we’ll tell you straight when a conversion is the cheaper answer and when it isn’t. Estimates are free, so call (888) 255-7593 and we’ll get you a real number.
FAQs – Tub-to-Shower Conversion
How much does a tub-to-shower conversion cost in Grand Prairie?
A tub-to-shower conversion in Grand Prairie generally costs $4,200 to $9,800, with most homeowners landing between $6,000 and $8,200 for a tile conversion with a bench. Acrylic pans and surrounds sit at the low end; custom tile pans and niches sit at the high end. Any drain relocation or subfloor repair is priced separately and in writing before it happens. Call (888) 255-7593 for an exact quote – estimates are free.
Can you convert a tub to a shower in the same space?
Yes. Almost every conversion uses the existing tub footprint, which is why it costs less than relocating a shower. The drain stays near where it was, the opening stays the same width, and the rest is new substrate, waterproofing, and finish. The old tub opening is typically 60 inches by 30 to 32 inches, which fits a standard shower pan comfortably. On some layouts we widen the opening, and we’ll tell you at the estimate whether that’s worth doing.
How long does the work take?
Most tub-to-shower conversions take three to five working days on site. A simple acrylic pan and surround can be done faster; a full tile conversion with a custom pan runs toward the top of that window. The schedule is in the written scope before work starts, and we don’t disappear mid-job – calls are answered by a live person 24/7 if anything comes up during the project. Call (888) 255-7593 and we’ll walk you through timing for your bathroom.
Is it cheaper to repair the tub or convert to a shower?
It depends on what’s actually wrong. If only the surround is cracked and the pan is sound, a repair can cost a few hundred dollars and be the right call. But if the substrate under the tub is soft or water has gotten behind the walls, repairing the surface is throwing money at a problem that comes back. A conversion replaces the whole wet area and, on a 365-Day Done Right Promise, is backed in writing for a full year. Call (888) 255-7593 for a free estimate and an honest answer on which one you actually need.
Why Bradford Remodeling Co Grand Prairie for This Job
Tub-to-shower work is where shortcuts show up later. The waterproofing you don’t see is what fails at year two. That’s why we put the price and the guarantee in writing before a single tool comes out, and why the 365-Day Done Right Promise means we come back and correct anything that doesn’t hold within the guarantee period – free. Our technicians have up to 22 years of experience, they’re background-checked and uniformed, and you’ll know exactly who’s showing up before they arrive. Bradford Remodeling is part of the Garrison Partners family, established in 2004, independently owned and operated, and held to The Garrison Standard on every job. If you’ve been burned by a no-show or a surprise invoice, that’s exactly what The Garrison Code is built to prevent – a written price, a documented scope, and a clean site at close.
Whether you’re converting the hall bath in a Grand Prairie home or planning a larger rework, we’ll give you a straight answer and a written number. Call (888) 255-7593 for a free estimate on your tub-to-shower conversion.
Written by the team at Bradford Remodeling Co Grand Prairie, serving Grand Prairie.


